Main hardware parameters | |
size | 120mm long*90mm wide*20mm high |
CPU | Allwinner A523 octa-core A55 clocked at 1.8G |
GPU | G57 |
Memory | LPDDR4 standard 2GB/4GB optional 1GB |
memory | EMMC 5.1 standard 8GB/32GB, optional 16GB/64GB |
Power management | AXP717+AXP323 |
Working voltage | 12V 2A or more |
Support system | Android 13 |
operating temperature | -10 to +75 degrees |
Commonly used interfaces on motherboards | |
USB interface | 4-way USB port External J8215 is OTG2.0 |
USB3.0 interface | 1 USB3.0 interface |
Camera interface | 2-way 2+4LANE MIPI camera interface, built-in ISP up to 800W |
serial port | 4 UART serial ports (one of which is debug and can be changed to a normal serial port) |
SPI interface | 1 external SPI |
4G interface | Can be connected to 4G module to access the Internet (USB) |
Voice input | 1 way microphone |
Voice output | 1 headphone output + 1 speaker output 5W/8 ohm |
TF card | Support TF card |
Other extension interfaces | 18 available GPIO channels |
MIPI display | 1 channel MIPI display output, single channel up to 1920x1080 |
LVDS display | 1 channel LVDS output up to 1280x800 |
Ethernet 1 | 1 channel 10M/100M/1000M RTL8211F |
Ethernet 2 | 1 channel 10M/100M SR9900B |
WIFI | WIFI 2.4G/5G (AP6256) |
Bluetooth | 1 channel 5.0 Bluetooth+BLE(AP6256) |
ADC interface | 4-channel 16-bit ADC interface |
indicator light | 1 GPIO controllable indicator light interface |
RTC real time clock | External button battery power-off time storage (independent 8563) power consumption is less than 1uA |
System upgrade | Support local USB upgrade |
project | smallest | typical | maximum | |
Power parameters | Voltage | 7.5V | 12V | 15V |
ripple | -- | 50mV | 120mV | |
current | 162mA | -- | -- | |
Supply current (No other peripherals connected) | Start-up current | 165mA | 229mA | 486mA |
play sound | 172mA | 215mA | 365mA | |
environment | relative humidity | -- | 65% | 75% |
working temperature | -10℃ | -- | 75℃ | |
Storage temperature | -30℃ | -0℃ | 100℃ | |
Main hardware parameters | |
size | 120mm long*90mm wide*20mm high |
CPU | Allwinner A523 octa-core A55 clocked at 1.8G |
GPU | G57 |
Memory | LPDDR4 standard 2GB/4GB optional 1GB |
memory | EMMC 5.1 standard 8GB/32GB, optional 16GB/64GB |
Power management | AXP717+AXP323 |
Working voltage | 12V 2A or more |
Support system | Android 13 |
operating temperature | -10 to +75 degrees |
Commonly used interfaces on motherboards | |
USB interface | 4-way USB port External J8215 is OTG2.0 |
USB3.0 interface | 1 USB3.0 interface |
Camera interface | 2-way 2+4LANE MIPI camera interface, built-in ISP up to 800W |
serial port | 4 UART serial ports (one of which is debug and can be changed to a normal serial port) |
SPI interface | 1 external SPI |
4G interface | Can be connected to 4G module to access the Internet (USB) |
Voice input | 1 way microphone |
Voice output | 1 headphone output + 1 speaker output 5W/8 ohm |
TF card | Support TF card |
Other extension interfaces | 18 available GPIO channels |
MIPI display | 1 channel MIPI display output, single channel up to 1920x1080 |
LVDS display | 1 channel LVDS output up to 1280x800 |
Ethernet 1 | 1 channel 10M/100M/1000M RTL8211F |
Ethernet 2 | 1 channel 10M/100M SR9900B |
WIFI | WIFI 2.4G/5G (AP6256) |
Bluetooth | 1 channel 5.0 Bluetooth+BLE(AP6256) |
ADC interface | 4-channel 16-bit ADC interface |
indicator light | 1 GPIO controllable indicator light interface |
RTC real time clock | External button battery power-off time storage (independent 8563) power consumption is less than 1uA |
System upgrade | Support local USB upgrade |
project | smallest | typical | maximum | |
Power parameters | Voltage | 7.5V | 12V | 15V |
ripple | -- | 50mV | 120mV | |
current | 162mA | -- | -- | |
Supply current (No other peripherals connected) | Start-up current | 165mA | 229mA | 486mA |
play sound | 172mA | 215mA | 365mA | |
environment | relative humidity | -- | 65% | 75% |
working temperature | -10℃ | -- | 75℃ | |
Storage temperature | -30℃ | -0℃ | 100℃ | |
Product Show Case